If you have the Locate Filter set to Piping Parts, then Get Features selects the parent feature of the selected part or parts.
If you have the Locate Filter set to Piping Runs, then Get Features selects all features in the selected run.
If you have the Locate Filter set to Piping Features, then Get Features contains a group of subcommands to select a targeted route network. The Get Features commands apply to features that are in the select set and are defined in the Workspace. You can select one or more features on the network. You can also combine the following subcommands to extend the targeted network as necessary.
On Same Run
Selects all features that belong to the same run even if the run is discontinued.
|
|
|
On Same Leg
Selects all features that belong to the same leg. The software also includes the along-leg feature if the selected leg is a branch. A leg is a group of route features routed in the same direction.
|
|
|
On All Connected Branches
Selects all features associated with the connected branches. Select an along-leg feature that has a branch connected. Right-click, and select On All Connected Branches. The software selects the associated features connected to the branch run until it branches into a header run, or until a free end is traversed.
|
|
|
For Connected Fittings
Adds the immediate connected fittings to the selection. You must select a branch component. You can select a leg using On Same Leg, and then use For Connected Fittings to add all the adjacent branch fittings on that leg to the selection.
|
|
|
