Pipe Rack Zone worksheet - Intergraph Smart 3D - Update 1 - Reference Data - Hexagon

Intergraph Smart 3D Space Management Reference Data

Language
English
Product
Intergraph Smart 3D
Subproduct
Space Management
Search by Category
Reference Data
Smart 3D Version
14

The Pipe Rack Zone worksheet in the SpaceMgmt.xls workbook defines zones that contain pipe racks.

In addition to the common properties discussed in Space Management worksheets, the following properties can be defined for a pipe rack zone:

CostFactor

Type a factor that specifies the relative cost of routing pipe through the zone.

OnFace

Type the code that represents on which face of the zone the routed pipe will lie. Valid codes and short descriptions are listed in the AllCodeLists.xls workbook on the Route On Face worksheet in the Codelist Number and Route On Face Short Description columns.

Layout

Type the code that represents how the routed pipes are arranged on that face of the pipe rack zone. Valid codes and short descriptions are listed in the AllCodeLists.xls workbook on the Route Layout worksheet in the Codelist Number and Route Layout Short Description columns.

RouteDirection

Type the code that represents the direction relative to the local coordinate system in which pipe will be routed. Valid codes and short descriptions are listed in the AllCodeLists.xls workbook on the Route Direction worksheet in the Codelist Number and Route Direction Short Description columns.

SteelAnalysis

Type the structural steel analysis code for the pipe rack zone. Valid codes and short descriptions are listed in the AllCodeLists.xls workbook in the Short Descriptions and Codelist Number columns on the IcarusStructSteelAnalysis worksheet.

ColumnBaseOption

Type the code that represents the connection at the column base for the pipe rack zone. Valid codes and short descriptions are listed in the AllCodeLists.xls workbook in the Short Descriptions and Codelist Number columns on the IcarusColumnBaseOption worksheet.

GratingType

Type the code for the type of grating used for the pipe rack zone. Valid codes and short descriptions are listed in the AllCodeLists.xls workbook in the Short Descriptions and Codelist Number columns on the IcarusGratingType worksheet. For example, 50 represents a 1/4 IN [5 MM] SS slipnot plate.

PipeRackType

Type the code for the pipe rack type code for the pipe rack zone. Valid codes and short descriptions are listed in the AllCodeLists.xls workbook in the Short Description and Codelist Number columns on the IcarusPipeRackType worksheet.

ConcreteType

Type the code that represents the type of concrete used in the pipe rack zone. Valid codes and short descriptions are listed in the AllCodeLists.xls workbook in the Short Description and Codelist Number columns on the IcarusConcreteType worksheet. For example, 10 represents Higher grade concrete (Type C).

ThirdColumnOption

Type the code that represents whether or not a third row column is required for the pipe rack zone. Valid codes and short descriptions are listed in the AllCodeLists.xls workbook in the Short Description and Codelist Number columns on the IcarusThirdColumn worksheet.

EndBentExclusion

Type the code that represents whether or not to exclude end bents in the pipe rack zone. Valid codes and short descriptions are listed in the AllCodeLists.xls workbook in the Short Description and Codelist Number columns on the IcarusExcludeEndBent worksheet.