Modify a sketched cross-section - Intergraph Smart 3D - Help - Hexagon PPM

Intergraph Smart 3D Space Management

Language
English
Product
Intergraph Smart 3D
Subproduct
Space Management
Search by Category
Help
Smart 3D Version
13.1
  1. Click Select .

  2. Select the volume for which you want to modify the sketched cross-section.

  3. Click Cross-Section .

    The software displays the cross-sectional path in yellow.

  4. Click Show Cross-Section View to display the sketched cross-section in a new window.

    A new window opens that is oriented to display the sketch (cross-section) plane as seen from the end of the first path segment.

  5. If you want to Modify a straight segment in a path, select the segment that you want to modify, and then make changes on the Edit Path Straight Segment ribbon.

  6. If you want to Modify an arc in a path, select the arc that you want to modify, and then make changes on the Edit Path Arc ribbon.

  7. If you want to Modify a turn in a path, select the turn that you want to modify, and then make changes on the Edit Path Turn ribbon.

  8. If you want to Move segments of a path, click the segment that you want to move, and then click the point from which you want to move the segment and the point to which you want to move the segment.

  9. If you want to Add segments to a path, click Create on the ribbon, and then click to place the new segments.

    SHARED Tip You can add as many segments to the cross-sectional path as you need. However, you must close the cross-sectional path to be able to save the cross-sectional path.

  10. If you want to delete a segment, select the segment that you want to delete, and then click Delete Delete CLASSIC ICON.

  11. Click Finish to accept the path changes.

  12. Click Finish to modify the volume.