Place concentrated load using point along - Intergraph Smart 3D - Help - Hexagon PPM

Intergraph Smart 3D Structural Analysis

Language
English
Product
Intergraph Smart 3D
Subproduct
Structural Analysis
Search by Category
Help
Smart 3D Version
13.1
  1. Click Tools > Point Along to activate the Point Along command.

  2. Select the member on which the load is going to be placed as the object to measure along.

    Place Concentrated Load Point Along STEP 2

  3. Place the reference point at the start of the member.

    Place Concentrated Load Point Along STEP 3

  4. Select Place New Concentrated Load Command .

  5. Select the member on which to place the load.

    Place Concentrated Load Absolute STEP SELECT MEMBER

  6. Click Accept .

  7. Select the load case for the load. Use Create or Modify Load Cases to create new load cases.

    Place Concentrated Load Absolute STEP SELECT CASE

  8. Set the Load and Reference options. For more information on the Load and Reference options, see Learn more about Loads.

  9. Type a value in the Magnitude box.

  10. Identify the location of the load on the member by either dragging the cursor along the member until the distance you want displays or by typing a distance in the Distance box on the Point Along ribbon.

    Place Concentrated Load Point Along STEP Location

  11. Click Accept .

  12. Click Finish.