Specifies the parameters for the smart occurrence object.
Parameter
Displays the name of the parameter.
Value
Displays the value of the parameter. Values that are grayed cannot be modified.
Rule-Based
Displays a check box if the parameter value is rule-based. Clear the check box to modify the value in the Value box.
Catalog Value
Displays the original catalog value if the Value box has been modified.
Welding Symbol Parameters
In addition to physical connection parameters, welding symbol parameters are also visible. Weld symbols are used by the Drawings and Reports task but welding symbol parameters are only visible on the Parameters tab for a physical connection:
1 - Primary Side Symbol or Primary Side Groove |
13 - Secondary Side Pitch or Distance Between the Ends of Adjacent Welds |
2 - Secondary Side Symbol or Secondary Side Groove |
14 – Primary Side Contour |
3 – Primary Side Groove Size |
15 – Secondary Side Contour |
4 – Secondary Side Groove Size |
16 – Primary Side Finish Method |
5 - Primary Side Bevel Depth or Leg Length or Actual Throat Thickness or Strength |
17 – Secondary Side Finish Method |
6 - Secondary Side Bevel Depth or Leg Length or Actual Throat Thickness or Strength |
18 – Primary Side Root Opening or Depth of Filling |
7 – Field Weld |
19 - Secondary Side Root Opening or Depth of Filling |
8 - All Around |
20 – Primary Side Groove Angle or Included Angle of Countersink |
9 – Tail Notes |
21 - Secondary Side Groove Angle or Included Angle of Countersink |
10 – Primary Side Length |
22 – Primary Side Number Of Welds |
11 – Secondary Side Length |
23 - Secondary Side Number Of Welds |
12 – Primary Side Pitch or Distance Between the Ends of Adjacent Welds |
The actual parameters provided depend upon the type of physical connection, but the following figures are representative.See physical connection reference data in Structural Detailing Reference Data.
The following example shows the welding symbol properties for a Y tee weld. Other tee welds and lap welds are similar.
The next example shows the welding symbol parameters for a V butt weld. Fewer of the parameters are exposed because many are not applicable to a butt weld.