Seven butt weld types are delivered. The selection rule uses the selector questions, some of which are user-definable, and the thickness of the plates to determine which butt weld to select. The following sections describe each weld possibility.
Name |
Plate Thickness |
Parameters |
|
---|---|---|---|
BI |
[10mm,+∞] |
RootGap=0mm NRRootGap=0mm |
|
BY |
[15mm,25mm] |
RootGap=1mm NRRootGap=1mm Nose=2mm NRNose=2mm BevelAngle=30° NRBevelAngle=30° |
|
BX |
[25mm,+∞] |
RootGap=2mm NRRootGap=2mm Nose=2mm NRNose=2mm BevelAngle=27.5° AntiBevelAngle=27.5° NRBevelAngle=27.5° NRAntiBevelAngle=27.5° |
|
BV |
[8mm,25mm] |
RootGap=1mm NRRootGap=1mm BevelAngle=27.5° NRBevelAngle=27.5° |
|
BIV |
[0,25mm] |
RootGap=1mm NRRootGap=1mm BevelAngle=50° |
|
BIVChill |
[8mm,32mm] |
RootGap=3mm NRRootGap=3mm BevelAngle=40° |
|
BVChill |
[8mm,32mm] |
RootGap=3mm NRRootGap=3mm BevelAngle=22.5° NRBevelAngle=22.5° |