Properties
Activates the Weld Compensation Settings Dialog, which you use to view and modify the settings for the selected weld compensation object.
Select Part
Select the plate part for the weld compensation.
Select Port
Select the edge of the plate for the weld compensation.
Select Start Point
Select the weld compensation starting point. The software highlights the part where you can set the point.
Select End Point
Allows you to set the weld compensation end point. The software highlights the part where you can set the point.
Finish
Creates or modifies the weld compensation object.
Cancel
Clears the active step in the workflow, and returns to the previous step.
Accept
Accepts the current step in the workflow, and proceeds to the next step.
Sel Method
Specifies the selection method associated with the weld compensation.
Offset Type
Specifies the offset type associated with the weld compensation.
Offset Value
Specifies the distance from the reference point or object to the location in which the software applies the weld compensation.
Weld Comp Radius
Specifies the approximate compensation shape along the selected edge of the part.
Weld Comp Offset
Specifies the offset distance for the weld.
Accept Weld Compensation to Form
Adds the current weld compensation values to the table if Form is selected.
Cancel Weld Compensation from Form
Deletes the highlighted weld compensation values from the table if Form is selected.
Form
Creation
Displays the weld compensation radius and weld compensation offsets defined for the new weld compensations.
Modification
Displays the weld compensation radius and weld compensation offsets defined for existing weld compensations on the selected edge.