Process Tab for Profile Faces (Template Properties Dialog) - Intergraph Smart 3D - Help - Hexagon

Intergraph Smart 3D Structural Manufacturing

Language
English
Product
Intergraph Smart 3D
Subproduct
Structural Manufacturing
Search by Category
Help
Smart 3D Version
13.1

When you select multiple objects, you can change the properties that those objects have in common. If the value of the property is the same for the objects that you have selected, that value displays in the ribbon bar. If the values are different, the box for that value is blank. Changing the value of a property makes that the value for all of the selected objects.

User Answers

Select a template process type from the list. This list is the same as the Process list on the Template ribbon.

Parameter

Displays the parameters for the process that you have selected.

Value

You can modify the parameter values if necessary.

Rule-Based

If the value of the parameter is rule-based, a check box displays. You can clear the check box and then select a different parameter value if necessary.

Catalog Value

Displays the original catalog value for the process if you modified the value.

Type

Specifies the type of the template. Template types include:

  • frame

  • perpendicular

  • user defined

  • aft forward

  • even

Side

Specifies the side on which the template set is applied.

Orientation

Specifies the orientation for the template. Template orientations include:

  • along frame

  • perpendicular

  • normal to base plane

Min Height

Specifies the minimum height of the template.

Max Height

Specifies the maximum height of the template.

Position

Specifies the positions at which templates must be placed. This could be at Frames, at Even Distance, or at Edges.

Extension

Specifies the extension for the template. Extensions include:

BothSidesFixed

Creates a template on both sides of the base control line and extends that template on both sides with a fixed value.

BothSidesNo

Creates a template on both sides of the base control line with no extension.

BothSidesOffset

Creates a template on both sides with an extension based on the offset.

LowerSideFixed

Creates a template with a fixed extension only on the lower side of the base control line.

LowerSideOffset

Creates a template with an offset-based extension only on the lower side of the base control line.

LowerSideNo

Creates a template with no extension only on the lower side of the base control line.

UpperSideFixed

Creates a template with a fixed extension only on the upper side of the base control line.

UpperSideOffset

Creates a template with an offset extension only on the upper side of the base control line.

UpperSideNo

Creates a template with no extension only on the upper side of the base control line.

Template Service

Creates template profiles.

See Also

Profile Face Template Properties Dialog