Add scaling by axis shrinkage - Intergraph Smart 3D - Help - Hexagon

Intergraph Smart 3D Structural Manufacturing

Language
English
Product
Intergraph Smart 3D
Subproduct
Structural Manufacturing
Search by Category
Help
Smart 3D Version
13.1
  1. Click Shrinkage Command .

  2. On the Shrinkage ribbon, select the Mode that meets your requirements.

  3. Click Plates/Profiles/Assembly .

  4. Select the parts to which to add shrinkage. You can select the parts in the model or from the Workspace Explorer. However, because of the different ways in which shrinkage is applied to plates and profiles, you can only select one type at a time.

  5. Select By Axis from the Shrinkage Type list.

  6. Select a grid system to define the shrinkage directions.

  7. Select the primary axis from the list.

  8. Select the secondary axis from the list.

  9. Type a value in the Primary Factor box.

  10. Type a value in the Secondary Factor box. If no shrinkage is needed in the secondary direction, use a Secondary Factor of 0.00.

  11. Type a value in the Tertiary Factor box. If no shrinkage is needed in the tertiary direction, then use a Tertiary Factor of 0.00.

  12. Click Finish.