Type
Specifies the type of template. Template types include:
-
frame
-
center line
-
perpendicular
-
stern/stem
-
perpendicular XY
-
aft and forward
-
user defined
-
even
-
box
-
user defined box
-
user defined box with edges
Side
Specifies the side on which the template set is applied.
Orientation
Specifies the orientation for the template. Template orientations include:
-
along frame
-
perpendicular
-
normal to base plane
Min Height
Specifies the minimum height of the template.
Max Height
Specifies the maximum height of the template.
Position
Specifies the positions at which templates must be placed. This could be at Frames, at Even Distance, or at Edges.
Extension
Specifies the extension for the template.
Base Plane
Specifies the base plane options for the template. Base plane options include:
-
Normal to plate
-
Parallel to plate
-
By system
-
User defined
Direction
Specifies the direction of the template. Direction options include:
-
Longitudinal
-
Transversal
-
Waterline
Template Service
Specifies the rule that computes the base plane, base control line, and template contours.
Type |
Side |
Min |
Max |
Orientation |
Direction |
Position |
Position |
Extension |
Base |
Frame |
0 |
0 |
0 |
0 |
0 |
0 |
0 |
0 |
|
Center |
0 |
0 |
0 |
0 |
0 |
0 |
0 |
0 |
|
Perpendicular |
0 |
0 |
0 |
0 |
0 |
0 |
0 |
0 |
|
Perpendicular |
0 |
0 |
0 |
X |
0 |
X |
X |
0 |
0 |
Stern/ |
0 |
0 |
0 |
X |
X |
X |
X |
0 |
0 |
User |
0 |
0 |
0 |
0 |
X |
X |
X |
0 |
Legend:
0 - meaningful
X - not meaningful; ignored
-
If orientation is AlongFrame, Position Even should not be used and PositionFrames should be set to PositionFrame.
-
The BySystem option is always applied because the BasePlane is generated by special logic in the code level.
-
If Type is set to Frame, Direction should always be set to Transversal (Y direction).