Wall Composition - Intergraph Smart 3D - Reference Data - Hexagon PPM

Intergraph Smart 3D Structure Reference Data

Language
English
Product
Intergraph Smart 3D
Subproduct
Structure
Search by Category
Reference Data
Smart 3D Version
13.1

The Wall Composition node (the Type sheet in the StructWallGeneral.xls workbook) defines the combination of layers that you want to use in your wall. Before defining the combinations in this sheet, you must define the layers that you plan to use in the StructWallLayer.xls workbook. See StructWallLayer Workbook.

When creating your walls, there are custom attributes and required attributes. You can add your custom attributes using the Custom Interfaces Sheet sheet (described in the Smart 3D Reference Data.)

Part Number

Enter a unique identification for the combination. This identification must be unique across the entire catalog.

Part Description

Enter a description for the combination.

Layer Number

Specify the number of layers that this combination will have.

Reference Layer Number

Specify the layer on which more or less thickness is placed when you update the total thickness of the wall.

Position

Enter the position number to specify the location where the cross section of the wall aligns with the wall path. Refer to the wall's cross-section to determine the position locations. See Member Cross Sections.

Horizontal Offset

Defines the distance from the wall path to the defined position on the cross section. A zero offset always puts the position on the path. You can enter a positive or a negative value to position the wall on either side of the path.

Vertical Offset

Defines the vertical distance from the wall path to the defined position on the cross section. A zero offset always puts the position on the path. You can enter a positive or a negative value to position the wall above or below the path.

Cross Section

Enter the cross section name and dimensions.

Thickness

Enter the wall thickness in millimeters.

Height

Enter the wall height in millimeters.

Layer Type #

For each layer in the combination, enter the sheet name in the StructWallLayer.xls workbook that contains the layer that you want to specify. For example, in the delivered StructWallLayer.xls sample workbook there are two sheets: WallConcrete and WallLayer. If you wanted to use a layer defined in the WallConcrete sheet, you would enter that sheet name in this column.

Layer Part Number #

For each layer in the combination, enter the layer part number as specified on sheet you specified in Layer Type # column in the StructWallLayer.xls workbook.