Displays the properties of the selected SIO slab. The property name appears on the left side of the grid and the corresponding property value appears on the right side of the grid. You can select only one SIO slab at a time.
Category
Specifies the properties category to view.
Name
Displays the name of the SIO slab.
Description
Displays a description of the SIO slab if a description is available.
Reporting Requirement
Specifies whether the selected SIO slab is reported.
Reporting Type
Specifies the reporting requirements code for the SIO slab. This value is based on the Reporting Requirement setting.
Tag Type
Displays the SIO slab's short code.
Tag Class
Displays the engineering tag if one is assigned.
Specific Type1
Specifies additional type information for the SIO slab if any information is available.
Specific Type2
Specifies additional type information for the SIO slab if any information is available.
Specific Type3
Specifies additional type information for the SIO slab if any information is available.
Specific Type4
Specifies additional type information for the SIO slab if any information is available.
Specific Type5
Specifies additional type information for the SIO slab if any information is available.
Piece Mark
Specifies the piece mark of the SIO slab. If a piece mark is displayed here, more than likely it is the identity of the manufactured part from another software package.
Assembly Mark
Specifies the assembly mark of the SIO slab. The assembly mark is usually the identity of the manufactured assembly to which the SIO slab belongs.
Slab Thickness
Displays the thickness of the SIO slab.
Priority
Specifies the continuity priority. This priority is used to select which SIO slab is split when two slabs intersect.
Continuity
Defines how the SIO slab should react when it intersects another slab
Composition
Specifies the composition to use for the SIO slab type.
Fire Rating
Specifies the fire rating time for the SIO slab.
Face Position
Specifies the way the SIO slab is placed in the model with respect to the support plane.
Normal Offset
Specifies the offset distance for the SIO slab from the selected support plane.
Slope
Specifies the slope of the SIO slab relative to the reference plane that was selected during placement.
Thickening Direction
Specifies the thickening direction.