The Structure task has these commands:
Select
Used to select objects in the model. See Selecting Objects.
Place Linear Member System Command
Places columns, beams, braces, and other linear members in the model.
Places a curved column, beam, or brace member in the model.
Places vertical cross bracing or vertical chevron bracing in the model.
Places secondary framing members between two supporting members that you specify.
Place Columns at Grid Intersections Command
Places columns at grid intersections.
Places structural members that support vertical vessels directly (typically four lugs
that rest on the members) or that
support the grating around the vessel.
Places a can in the model. A can is a reinforcing connection piece on a member to increase the surface area available for connections or to provide increased wall thickness or both.
Place Assembly Connection Command
Places assembly connections between linear member systems.
Divides a member system into multiple member parts while maintaining the design intent of the original member system.
Manually copes, snips, and planar trims member ends.
Places fireproofing on selected members.
Places slabs, plates, and grates in the model.
Places a wall in the model.
When two separate walls join at a corner, one wall extends past the other wall to form the corner. You can use this command to toggle which wall extends past the other.
Places equipment in the model. In the Structure task, use this command to place doors and windows.
Place Designed Equipment Command
Places equipment types that have been defined in the reference data.
Place Designed Equipment Component Command
Places equipment components that have been defined in the reference data.
Creates customized solids and equipment using shapes that add material to or subtract material from the designed solid.
Adds additional shapes or equipment objects to an existing designed equipment type. The icon displayed on the toolbar is the icon of the last shape selected from the palette.
Place Imported Shape from File Command
Adds geometry to a designed equipment object that was modeled with solid modeling software and saved to a format.
Places openings (holes) in slabs, walls, and linear member systems.
Place or Remove Opening Command
Places or removes openings (holes) in Smart Interop Object (SIO) walls and slabs. This command is available only when your model database contains SIO walls or SIO slabs.
Places stairs in the model.
Places ladders in the model.
Places a handrail in the model following a path that you specify.
Place Handrails by Member Command
Places a handrail on selected members without having to define a path.
Places column footings, selected from the catalog, in the model.
Place Equipment Foundations Command
Places a foundation for selected pieces of equipment.
Connects existing built-up or standard members using a pre-defined set of rules and tolerances.
Imports a CIS/2 file into the model. This command is on the File menu.
Exports the structural physical model to a CIS/2 or IFC file. This command is on the File menu.
Creates an XML mapping file for the section and material names used in the software and third-party application.