Specifies the properties for the opening that you are placing or editing.
Properties
Opens the SmartInteropWallPart Properties Dialog if you are working with a SIO wall. The SmartInteropSlab Properties Dialog opens if you are working with a SIO slab. You can use this dialog to specify opening properties that you cannot set on the ribbon.
Structure
Select the SIO slab or SIO wall in which to place the opening.
Sketching Plane
Select the plane on the object on which to draw the opening.
Sketch 2D
Opens the Structure Draft 2D environment, where you can draw the opening shape. You can draw more than one opening at a time.
Finish
Places the opening using the defined parameters.
Accept
Confirms the objects that you have selected.
Cancel
Rejects the objects that you have selected.
Operation
Specifies whether to add or remove the opening.
Place Opening
Places the opening in the selected SIO wall or SIO slab.
Remove Opening
Removes the opening from the selected SIO wall or SIO slab.
Cutting Limit
Specifies the cutting depth method for the opening.
User Defined
Select to specify the penetration depth of the opening. The cutting depth is applied equally in both normal and opposite of normal of the sketching plane.
Through-All
Select to completely penetrate the object in which the opening is placed.
Along the Normal
Select to apply the cutting depth along the normal of the sketching plane as indicated by the arrow.
Opposite to Normal
Select to apply the cutting depth in the opposite direction of the normal of the sketching plane as indicated by the arrow.
Cutting Depth
Specifies the cutting depth for the opening. The software measures the depth from the sketching plane that you specified. Be sure to define a cutting depth that intersects the structure. The cutting depth is indicated by the arrow in the graphic view.