Add fillet corner to existing wall using 2-D sketch - Intergraph Smart 3D - Help - Hexagon

Intergraph Smart 3D Structure

Language
English
Product
Intergraph Smart 3D
Subproduct
Structure
Search by Category
Help
Smart 3D Version
13
  1. Click Select on the vertical toolbar.

  2. Set the Locate Filter to Wall Systems.

  3. Select the wall to which to add the fillet corner.

    Add fillet to wall STEP SELECT WALL

  4. Click Select a Path selectapath on the Place Wall Ribbon.

  5. Click Sketch 2D on the ribbon.

  6. Click Draw .

    Add fillet to wall STEP 2D SKETCH

  7. Click Fillet on the vertical toolbar.

  8. Place the fillet on the wall path by identifying the two sides for the fillet and then the radius.

    Add fillet to wall STEP PLACE FILLET

  9. Click Add or remove graphic from a group Add Remove Graphics From Group on the Change toolbar.

  10. Click Select Graphic Group on the ribbon.

  11. Select the original wall path. Be sure to use the Bottom Up option during selection.

    Add fillet corner to wall STEP SELECT PATH

  12. Click Select elements to add to group or remove from it on the ribbon.

  13. Select the fillet segment of the wall path that you just placed. Be sure to use the Bottom Up option during selection.

    Add fillet to wall STEP SELECT FILLET

  14. Click Add on the ribbon.

  15. In the 2-D environment, click Close .

  16. Click Finish.

    Add fillet to wall STEP 2D FINISH

  17. Set the wall system, type, composition, and other properties.

  18. Optionally, click Select Boundaries to limit the height of the wall.

  19. Click Finish to place the fillet in the wall.

    Add fillet to wall STEP FINISHED