Add middle segments to existing wall using 2-D sketch - Intergraph Smart 3D - Help - Hexagon

Intergraph Smart 3D Structure

Language
English
Product
Intergraph Smart 3D
Subproduct
Structure
Search by Category
Help
Smart 3D Version
13
  1. Click Select on the vertical toolbar.

  2. Set the Locate Filter to Wall Systems.

  3. Select the wall to which to add segments.

    Add segments to walls STEP SELECT WALL

  4. Click Select a Path selectapath on the Place Wall Ribbon.

  5. Click Sketch 2D on the ribbon.

  6. Select objects in the model that you want to see when sketching the wall path in the 2-D environment.

    Add segments to wall STEP REF OBJs

  7. Click Draw .

    Add segments to wall STEP 2D SKETCH

  8. Click Split on the vertical toolbar.

  9. Identify the two locations on the wall between which you want to add to the wall. Be sure to use the Bottom Up option during selection.

    Add segments to wall STEP SPLIT TWICE

  10. Click Add or remove graphic from a group Add Remove Graphics From Group on the Change toolbar.

  11. Click Select Graphic Group on the ribbon.

  12. Select the original wall path. Be sure to use the Bottom Up option during selection.

  13. Click Select elements to add to group or remove from it on the ribbon.

  14. Select the segment of the wall path between the two points that you identified during the Split command. Be sure to use the Bottom Up option during selection.

  15. Click Remove Delete CLASSIC ICON on the ribbon. You have now removed the segment from the wall path group.

  16. Click Select on the vertical toolbar.

  17. Select the segment between the two points that you just removed from the group. Be sure to use the Bottom Up option during selection.

  18. Press Delete on the keyboard.

    You should now have a wall path with a gap in it.

    Add segments to wall STEP CREATE GAP

  19. Using commands on the vertical toolbar, like the Line command, draw the new wall segment in the gap. Make sure you connect to the two ends of the gap.

    Add segments to wall STEP ADD SEGMENTS

  20. In the 2-D environment, click Close .

  21. Click Finish.

    Add segments to walls STEP 2D FINISHED

  22. Set the wall system, type, composition, and other properties.

  23. Optionally, click Select Boundaries to limit the height of the wall.

  24. Click Finish to place the new wall segments in the model.

    Add segments to wall STEP FINISHED