Member cross section symbol is missing width or depth properties. Edit member and select a valid cross section for the member. Refer to... - Intergraph Smart 3D - Troubleshooting - Hexagon

Intergraph Smart 3D Troubleshooting Reference

Language
English
Product
Intergraph Smart 3D
Subproduct
Troubleshooting
Search by Category
Troubleshooting
Smart 3D Version
13

Meaning: The constructed cross-section that was used to define the member part is incomplete and does not have its width and/or depth properties. The most likely cause of this problem is that an older version of the cross-section definition was selected or a ship structure defined cross-section was selected. Without the width and depth properties the frame connections will not work properly and any member that frames into this ill-defined member will fail.

Recovery:

  1. Open the Structure task.

  2. Click Select .

  3. Set the Locate Filter to Member Parts.

  4. Select the member that is in error.

  5. In the Section name box on the ribbon, select a different cross-section.

For custom sections not delivered, see the 2D Symbols for detailed instructions on how to properly construct a member cross section.