Branch Position Affinity - Intergraph Smart 3D - Help - Hexagon PPM

Intergraph Smart 3Dx Property Descriptions

Language
English
Product
Intergraph Smart 3D
Subproduct
3Dx
Search by Category
Help
Smart 3D Version
13.1

Specifies the position affinity associated with the object.

BranchPositionAffinity_UNDEFINED = 0

Undefined position affinity.

BranchPositionAffinity_NONE = 1

The affinity of the branch is computed based on rules and remains consistent.

BranchPositionAffinity_UP = 2

The branch emanates from the upper half of the header. Up is with respect to the absolute Z direction.

BranchPositionAffinity_DOWN = 3

The branch emanates from the lower half of the header. Down is with respect to the absolute Z direction.

BranchPositionAffinity_TOP = 4

The branch is towards the top face of the header. This is applicable where the cross-section is rectangular, oval or U-shaped. Top corresponds to positive V direction of the cross-section.

BranchPositionAffinity_BOTTOM = 5

The branch is towards the bottom face of the header. This is applicable where the cross-section is rectangular, oval or U-shaped. Bottom corresponds to negative V direction of the cross-section.