Member Part Curve Properties - Intergraph Smart 3D - Help - Hexagon PPM

Intergraph Smart 3Dx Property Descriptions

Language
English
Product
Intergraph Smart 3D
Subproduct
3Dx
Search by Category
Help
Smart 3D Version
13.1

Displays properties for member part curves. Member parts are children of a standard member system and represent the physical parts in the model. Member parts connect logically to other member parts using assembly connections.

The order in which the properties display in your view depends on your configuration.

Approval State

Specifies the status of the selected object or filter. Changing this property sets the Status. The display depends on your access level. You might be unable to change the status of the object. The list is defined by the ApprovalStatus codelist.

Smart 3Dx saves an object to the database when you change that object's status. Use Undo (CTRL + Z) to reverse the status change.

You can only edit or manipulate an object with a status of Working.

Area

Specifies the cross-section area for the object. This property is read-only. To change this value, edit the object properties in Catalog or in the corresponding workbook.

Assembly Mark

Specifies the assembly mark of the member. If the member was imported through CIMsteel, the assembly mark is usually the identity of the manufactured assembly to which this member belongs.

Cleaning Responsibility

Specifies the party responsible for cleaning the object. To change the options on the list, edit the Cleaning Responsibility select list in Catalog.

Coating Color

Specifies the color of the object coating. To change the options on the list, edit the Coating Color select list in Catalog. Smart 3Dx includes this property in the painting area report.

Rule Controlled

Specifies that a rule defined for a parent property controls the value. If Rule Controlled does not display, you can select a value.Construction Requirement

Specifies the construction requirement for the object. To change the options on the list, edit the Construction Requirement select list in Catalog.

Created by

Specifies the name of the person who created the object.

Cut Length

Specifies the length of the member with cutbacks applied. You cannot change this value. A cutback is that part of a member removed by an assembly connection or by a manually placed trim (a cope, for example).

Date Created

Specifies the creation date of the object.

Date Last Modified

Specifies the date of the last modification to the object.

Design Responsibility

Specifies the party responsible for designing the object. To change the options on the list, edit the Design Responsibility select list in Catalog.

Dry Center of Gravity

Specifies the location of the dry center-of-gravity for the object.

Exterior Coating Area

Specifies the area of the coating for the object.

Exterior Coating Requirement

Specifies the coating requirement for the object. To change the options on the list, edit the Coating Type select list in Catalog.

Rule Driven

Specifies that a rule drives the value. This is the default option. Click to switch to User Driven .

User Driven

Allows you to select a value. Click to switch to Rule Driven .

Fabrication Requirement

Specifies the fabrication requirement for the object. To change the options on the list, edit the Fabrication Type select list in Catalog.

Rule Driven

Specifies that a rule drives the value. This is the default option. Click to switch to User Driven .

User Driven

Allows you to select a value. Click to switch to Rule Driven .

Fabrication Responsibility

Specifies the party responsible for fabricating the object. To change the options on the list, edit the Fabrication Responsibility select list in Catalog.

Hyperlink

Specifies the URL or local file path associated with the object. Click the hyperlink to open the page or object in your default browser. Point to the hyperlink to display the URL or path as a tooltip.

Description

Specifies the descriptive text associated with the hyperlink.

URL

Specifies the web address or local file name associated with the hyperlink. The URL must include the protocol, such as http: or https:, as well as the domain name. For example, https://hexagonppm.com/.

Installation Responsibility

Specifies the party responsible for installing the object. To change the options on the list, edit the Installation Responsibility select list in Catalog.

Last Modified by

Specifies the name of the person who last modified the object.

Length

Specifies the object length.

Name

Specifies the name of the selected object. If the name is too long to entirely display in the box, point to the box to display the complete name as a tool tip. If the name is not defined by a rule, User Defined displays. If this name is generated by a naming rule, Naming Rule displays. If you type a name in this box, Smart 3Dx automatically changes the naming rule to User Defined.

Painting Responsibility

Specifies the party responsible for painting the object. To change the options on the list, edit the Painting Responsibility select list in Catalog.

Parent System

Specifies the parent system for the object. Recently used systems that are appropriate to assign as the parent system for this object display in the list along with the Select from Workspace and Select from Model options. The most recently used system displays at the top.

The parent system of the object must have an Approval Status of Working before you can change the Parent System value. If the Approval Status of the parent system is not set to Working, this value is read-only.

Select Interactively

Turns on or off the interactive selection. When this option is on, you can select the parent object in a graphic view or any of the explorers.

Select from Workspace ICON Select from Workspace

Displays the Select Parent System Dialog with the Workspace tab open. The workspace is the subset of the active model database you specified when you started your design session. Navigate the hierarchy to select the parent system, and then click OK.

Select from Model ICON Select from Model

Displays the Select Parent System Dialog with the Model tab open. The model is all of the objects in the active model database, including those that are not part of your workspace. Navigate the hierarchy to select the parent system, and then click OK.

Piece Mark

Specifies the piece mark of the member. Piece marks are typically used when importing and exporting member through CIMsteel. If a piece mark displays, the mark is usually the identity of the manufactured part from the other software package.

Priority

Specifies the priority assigned to the object system. Smart 3Dx uses the priority to group objects. To change the options on the list, edit the Structural Member Priority select list in Catalog.

Reporting Requirement

Specifies whether this object is reported.

Requisition Responsibility

Specifies the party responsible for ordering the object. To change the options on the list, edit the Requisition Responsibility select list in Catalog.

Seam Angle

Specifies the location of the seam. This angle is measured clockwise from orientation vector of the member looking down the member from the start end.

Seam Angle Concept

Supply Responsibility

Specifies the party responsible for delivering the object. To change the options on the list, edit the Supply Responsibility select list in Catalog.

Testing Responsibility

Specifies the party responsible for testing on the object. To change the options on the list, edit the Testing Responsibility select list in Catalog.

Type Category

Specifies the type category of the member, such as a beam or a column. The available member type and properties change depending on the member type category that you select. You can define a custom member type category by editing the Structural Member Type list in the Catalog task.

Wet Center of Gravity

Specifies the location of the wet center-of-gravity for the object.