Displays properties for pipe nozzles. A pipe nozzle, or port, defines the connection location between a pipe run and a piece of equipment. The software automatically places a connection part based on the default part listed in the catalog. The part generation depends on the connecting end preparations and the pipe run properties.
The order in which the properties display in your view depends on your configuration.
Approval State
Specifies the status of the selected object or filter. Changing this property sets the Status. The display depends on your access level. You might be unable to change the status of the object. The list is defined by the ApprovalStatus codelist.
Smart 3Dx saves an object to the database when you change that object's status. Use Undo (CTRL + Z) to reverse the status change.
You can only edit or manipulate an object with a status of Working.
Behavior Controlled by User
Specifies whether you can delete the object or not. Select False to prevent anyone from deleting the object from the model.
Construction Requirement
Specifies the construction requirement for the object. To change the options on the list, edit the Construction Requirement select list in Catalog.
Correlation Approval Status
Specifies whether the object is approved with discrepancies in the three-dimensional data compared with design basis data. The list is defined by the EFWCorrelationApprovalStatus sheet in the AllCodelist workbook.
Topology mismatch approved
Indicates that the object topology mismatch can be ignored.
Data and Topology mismatches approved
Indicates that the object data and topology mismatches can be ignored.
None
Indicates that you do not approve a mismatch.
Correlation Basis
Specifies whether the object is correlated to a P&ID object. The list is defined by the EFWCorrelationBasis select list.
Correlate Object
Indicates that the object has a correlating object in a P&ID.
No correlation is required
Indicates that the object does not have a correlating object in a P&ID.
Correlation Status
Specifies whether the object has been correlated to an object in a P&ID. The list is defined by the EFWCorrelationStatus select list.
Created By
Specifies the name of the person who created the object.
Date Created
Specifies the creation date of the object.
Date Last Modified
Specifies the date of the last modification to the object.
Distribution Port Status
Specifies the distribution port status for the object. To change the options on the list, edit the Distribution Port Status select list in Catalog.
Distribution Port Type
Specifies the distribution port type for the object. To change the options on the list, edit the Distribution Port Type select list in Catalog.
End Practice
Specifies the end practice for the object. To change the options on the list, edit the End Standard select list in Catalog.
End Standard
Specifies the end standard code for the part port. To change the options on the list, edit the End Standard select list in Catalog.
Fabrication Requirement
Specifies the fabrication requirement for the object. To change the options on the list, edit the Fabrication Type select list in Catalog.
Rule Driven
Specifies that a rule drives the value. This is the default option. Click to switch to User Driven .
User Driven
Allows you to select a value. Click to switch to Rule Driven .
Flange or Hub Outside Diameter
Specifies the diameter for the flange or hub of the object.
Flange or Hub Thickness
Specifies the thickness of the flange or hub of the object.
Flange or Mechanical Groove Width
Specifies the width of the flange or mechanical groove of the object.
Flange Projection or Socket Offset
Specifies the projection of the flange or offset of the socket for the object.
Flow Direction
Specifies the flow direction code for the port. Specifying the correct flow direction code for each part port is very important because the software automatically orients the part to the flow direction of the pipe or port to which the part is connected. To change the options on the list, edit the Flow Direction select list in Catalog.
Hyperlink
Specifies the URL or local file path associated with the object. Click the hyperlink to open the page or object in your default browser. Point to the hyperlink to display the URL or path as a tooltip.
Description
Specifies the descriptive text associated with the hyperlink.
URL
Specifies the web address or local file name associated with the hyperlink. The URL must include the protocol, such as http: or https:, as well as the domain name. For example, https://hexagonppm.com/.
Insulation Criteria
Specifies the insulation criteria for the nozzle.
Up to Neck Only
Indicates that the nozzle is insulated up to the neck, leaving the flange uninsulated
Complete
Indicates that both the nozzle neck and flange are insulated.
The list is defined by the InsulationCriteria codelist.
Insulation Material
Specifies the material of the insulation. If Insulation Specification is set to use the insulation defined by the equipment object, this field cannot be changed. However, if Insulation Specification is manually defined, select the insulation material from those available from the reference data.
The list contains the last five insulation materials selected. Click More to browse the catalog for the insulation material to use. If you set this field to Not Insulated, the Insulation Thickness field is disabled. If you set this field to Use Run Material, the along leg feature inherits the insulation material from the duct run.
To change the options on the list, edit the Insulation Material select list in Catalog.
Insulation Operating Temperature
Specifies the operating temperature.
Insulation Purpose
Specifies the purpose of the insulation. If you selected Not Insulated in the Insulation Specification box, you cannot change the information in the Insulation Purpose box. However, if Insulation Specification is manually defined, you can select the purpose of the insulation in this box. If Insulation Specification is a selected reference data insulation specification, the software reads the purpose from the insulation specification from the reference data and displays it here.
To change the options on the list, edit the Insulation Purpose select list in Catalog.
Insulation Requirement
Specifies the requirement of the insulation. To change the options on the list, edit the Insulation Purpose select list in Catalog.
Insulation Surface Area
Specifies the measurement of the surface area of insulation.
Insulation Thickness
Specifies the thickness of the insulation.
Piping
If you selected Not Insulated in the Insulation Specification box, you cannot change the value in the Insulation Thickness box. However, if you manually entered the insulation specification, you must provide a corresponding insulation thickness value as per the specification. If you selected an insulation specification from the available list, the software automatically displays the corresponding thickness value as per the specification.
HVAC
If you selected Not Insulated in the Insulation Material box, this property is unavailable.
Insulation Type
Specifies the type of the insulation. To change the options on the list, edit the Insulation Purpose select list in Catalog.
Is Insulated
Specifies whether the nozzle object is insulated. If set to False, you cannot modify the information to any of the insulation properties.
Is Connected
Indicates whether the nozzle is connected.
Last Modified By
Specifies the name of the person who last modified the object.
Liner Thickness at Face of Flange
Specifies the thickness of the flange face for the object.
Liner Thickness at Inside Diameter
Specifies the thickness of the inside diameter of the object.
Name
Specifies the name of the selected object. If the name is too long to entirely display in the box, point to the box to display the complete name as a tool tip. If the name is not defined by a rule, User Defined displays. If this name is generated by a naming rule, Naming Rule displays. If you type a name in this box, Smart 3Dx automatically changes the naming rule to User Defined.
Nominal Size
Specifies the nominal diameter and unit associated with the pipe.
NPD
Specifies the nominal piping diameter for the object. Select a value from the list, or type a value in the text box. If you type an unsupported or invalid value, the box displays a red border and the corresponding error message, listed below.
Current port configuration does not return valid Nominal Size values.
NPD Unit Type
Specifies the units for the NPD value. Select mm or in from the list.
Nozzle Length
Specifies the measurement for the nozzle length.
Piping Outside Diameter
Specifies the outside diameter of the piping for the nozzle.
Piping Point Basis
Specifies the piping point basis code that identifies the function of the port. Valid codes are listed in the AllCodeLists.xls workbook on the Piping Point Basis sheet in the Codelist Number column.
Placement Type
Specifies a location type for the nozzle. The following location types are available for nozzles:
Radial
Straight nozzle with nozzle centerline on the radial plane.
Tangential
Straight nozzle on the radial plane, but the nozzle centerline does not intersect the vessel axis.
Axial
Straight nozzle normal to radial plane.
Skew
Straight nozzle that is tilted from both the radial plane and the vessel axis.
Axial Elbow
Elbow nozzle with hub centerline normal to the radial plane.
Radial Elbow
Elbow nozzle placed with the hub radial to the vessel axis.
Offset Radial Elbow
Elbow nozzle placed with the hub tangential to the vessel axis.
Offset Skew
Skew nozzle with a parallel offset in the radial plane.
Position by Plane and Axis
Places the nozzle at the intersection of the selected plane and axis. Available only for nozzles that have the same shape or design solid as the orientation reference.
Position by Point
Places the nozzle at the location you select with respect to the active coordinate system. Available with all Nozzles including PipePort (No Added Graphic) and HvacPort (No Added Graphic).
Position
Specifies the intersection point of the object to the axis. Use the East, North, and Elevation properties to change the position.
Raised Face or Socket Diameter
Specifies the diameter of the raised face or socket of the nozzle.
Rating Practice
Specifies the rating practice for the nozzle.
Reinforced Wall Thickness
Specifies the thickness of the reinforced wall of the nozzle.
Reporting Requirement
Specifies the reporting requirement for the object. To change the options on the list, edit the Reporting Type select list in Catalog.
Schedule Practice
Specifies the schedule practice for the nozzle.
Seating or Groove or Socket Depth
Specifies the depth of the seating, groove, or socket of the nozzle.
Suppress Graphics
Specifies whether the graphic representation displays.
Termination Class
Specifies the termination class for the nozzle. The list is defined by the TerminationClass codelist.
Wall Thickness or Groove Setback
Specifies the thickness of the wall or the setback of the groove for the nozzle.