Enables you to define the presentation of circuits and their components in a generated single line diagram.
Circuit internals
Enables you to define the presentation of circuit components.
Show only enabled circuit internals
Includes only those circuit components in the single line diagram for which the Is SLD parameter in the Properties window is set to TRUE.
Show all circuit internals
Includes in the single line diagram all the circuit components regardless of their Is SLD parameter setting in the Properties window.
Do not show any circuit internals
Excludes the circuit components in the generated single line diagram.
Distance between circuit internals
Enables you to define the vertical distance between the circuit components in the generated SLD.
Options for electrical analysis SLDs
Enables you to define the presentation of circuits and circuit components in an electrical analysis SLD. Note that these options are only available after selecting Electrical analysis SLD on the General tab. This is used to publish SLD to a third-party analyst application such as ETAP.
Show only circuits
Includes circuits but does not show any circuit components in generated electrical analysis single line diagrams.
Show only circuit internals
Includes only circuit components but without the circuits.
Do not show circuits or circuit internals
Excludes circuits and the circuit components in the generated single line diagram.
Circuits
Enables you to define the presentation of circuits.
Use bus tie symbols
This option deals with the way the software represents the connection between two redundant buses in a power distribution board.
Select this option to show a horizontal representation between two buses using the BusTie.sym file. In this case, the software shows the connection between the two buses as a straight bus-tie connection without showing the items connected between and within the circuits. Note that the BusTie symbol is a "circuit" type symbol and has its first connection point on the rightmost side and the second connection point at the leftmost side. Also, the item property in the SLD displays only the coupler information. Furthermore, if you use the Find in SLD command, the software finds the pertinent coupler and not the bus riser.
Clear this option to use a vertical representation of a connection between two buses. This is the standard bus coupler-riser circuit connection representation that includes both coupler and the riser circuits and displays them as vertical objects, connected to each other. The software displays both circuits as standard arrows.
Distance between circuits
Allows you to define the horizontal distance between the circuits above and below the buses in the generated SLD.
Show hidden feeder circuits and their downstream items
To hide feeder circuits and their downstream items in newly generated SLDs, clear this check box and set the IS SLD property of the required feeder circuits to FALSE. See Hide Feeder Circuits in SLDs.