Allows you to specify values for connections and tapping on a secondary transformer winding.
Tag
Identifies the transformer. The tag is the name that appears beside the item in the Electrical Index. The tag matches the naming convention for the item. Select the ellipsis button 
to open a dialog where you can modify the tag segments that are editable.
Connection
Allows you to select the type of connection for a 3-phase output.
Neutral grounding
Allows you to specify whether to use neutral grounding. The following standard options are available:
Ungrounded
Does not require grounding.
Solid grounding
Grounding is achieved by means of a cable connected directly to ground.
Impedance
Grounding is achieved by means of a cable connected to ground via a resistor.
Grounding cable
Allows you to specify a grounding cable when the Neutral grounding value is Solid grounding or Impedance. Select the ellipsis button to open the Find dialog from which you can select a suitable grounding cable. Note that for a cable
to be available for use as a grounding cable, its Neutral Earthing property must be set to True.
Grounding resistor
Allows you to specify a resistor when the Neutral grounding value is Impedance. You can use a grounding resistor with or without a grounding cable.Select the ellipsis
button to open the Find dialog from which you can select a suitable resistor. You define resistors under Static Electrical Equipment in the Electrical Index. Note that on the Find dialog, the software retrieves all the existing resistors regardless of whether they
have or have not been associated with transformers. Make sure that you select an appropriate
resistor that has not been associated yet.
Connection group
Allows you to select a connection group from the list, for example Dy11, Yy0. Note that the software does not validate the connection group value with respect to the values of the other connection properties that you specify.
Phase shift (degrees
Allows you to type a value between 0 and 360 representing the phase shift between this winding and the winding that feeds it.
Winding fed from
Allows you to select an option to specify whether the primary winding or the other secondary winding feeds the current winding (relevant to 3-winding transformers only).
Combined phase shift (degrees)
Allows you to type a value between 0 and 360 representing the phase shift between this winding and the primary winding (relevant to 3-winding transformers only).
Tapping options
Tapping required
Allows you to select this check box to enable the tapping options.
Tapping
Allows you to select a tapping option. The options are for information only and do not affect the ability to enter data values for the other properties in this section.
Tapping percentage per step
Allows you to type the percentage of the total winding length to be used for each step interval for tapping.
Number of steps
Allows you to type the total number of tapping points required along the winding.
Total tapping percentage range
The calculated value of the product of the tapping percentage per step and the number of steps.
Neutral Earthing Metering Equipment
Component Type
Displays the Component Type.
Component Tag
Displays the Component Tag number.
Order
Shows the order of appearance of the metering equipment on your drawing, the lower the number the closer to the winding.
Add
Opens the Find dialog and lists available PT/CT whose Neutral Earthing flag is False.
Remove
Removes the selected component.