Unassigned Loads Tab (Batch Load Association Dialog) - Intergraph Smart Electrical - Help - Hexagon

Intergraph Smart Electrical Help

Language
English
Product
Intergraph Smart Electrical
Search by Category
Help
Smart Electrical Version
10

The Batch Load Association dialog enables you to balance load flow of a particular bus and associate multiple loads with a power distribution board (PDB) and a bus. Also, allows you to display the calculated consumption for the entire power distribution board or a particular bus belonging to the selected power distribution board. You can also assign a load to a particular phase or define a load as a three-phase load.

Power distribution board

Specifies the power distribution board with which you associate the loads.

Bus

Allows you to select a specific bus for which you want to perform load association.

Bus phases

(Available for the Loads tab only)

The check boxes in this group box allow you to filter the display of loads in the Associated loads data window according to their assigned phases. You define the bus phase labels in the bus Properties window.

Phase 1

Filters the Associated loads list and displays only the loads that are associated with phase 1.

Phase 2

Filters the Associated loads list and displays only the loads that are associated with phase 2.

Phase 3

Filters the Associated loads list and displays only the loads that are associated with phase 3.

All phases

Displays all the loads disregarding their phase association.

Create circuits and cells

(Available for the Loads tab only)

Create circuits

Enables you to automatically create a feeder circuit for all the loads that are not associated with circuits. This selection does not affect the associated loads that are already associated with feeder circuits. The software creates a circuit based on the last applied typical circuit. If no typical circuit is associated with the current load, the software creates a feeder circuit without any circuit components.

Create cells

Enables you to automatically create a cell where the software creates the feeder circuits for the associated loads.

Unassigned Loads Tab

Allows you to associate unassigned loads that are associated with a PDB but have not yet been associated with a bus.

Item Tag

Displays the item tag for a load that has not been associated with a bus.

Type

Displays the electrical equipment sub-class of the load, for example, motor, heater.

Select

Selects the item tag to be assigned to the current bus.

Assign To Bus

Associates the selected item tags with the current bus after selecting Apply.

Show Preferences

Displays the preference settings for the calculation method for All Feeder Load Summary Report and the settings for the inclusion of coupled buses in All Feeder Load Summary Report.

Manage Operating Cases

Opens the Manage Operating Cases dialog where you can add, edit, or delete property values specific to various plant operating cases that exist for the current plant item.