Enables you to associate a control station with a cable and an electrical item such as a motor, heater, capacitor, harmonic filter, resistor, heat traces, UPS, VFD, battery chargers, other converting and electrical equipment.
Item tag
Identifies the control station. The item tag appears beside the control station in
the Electrical Index. The item tag matches the naming convention for the control station. Select the ellipsis
button 
to open a dialog where you can modify the tag segments that are editable.
Last applied typical I/O set
Indicates the last typical I/O set of signals that you applied to the control station, if appropriate. This information is read-only and appears only if you apply a typical I/O set by dragging it from the Reference Data Explorer or by applying options to the control station.
Associated equipment
Displays the electrical item associated with the control station.
You can associate one electrical item only per control station.
Find
Opens the Find dialog, which allows you to select an electrical item to associate with the control station.
Dissociate
Allows you to clear the association of the selected equipment with the control station.
Associated cables
Displays the plant cables that the software associates with the control station.
(Data window)
Describes the names and cable specifications of the associated cables.
Add
Opens the Find dialog , which allows you to select control, grounding, or instrumentation cables to associate with the control station.
You can associate more than one cable per control station.
Remove
Removes the selected associated cable from the control station.