The Change toolbar contains commands that you can use to modify the graphic elements in a drawing. You can activate the Change toolbar by using the View > Toolbars command.
Move
Moves elements from one location to another.
Align
Allows you to align two or more elements in a selection set.
Nudge
Moves a drawing item using keypad arrows.
Offset
Draws an offset copy of an element or a set of contiguous elements.
Rotate
Rotates one or more elements.
Mirror
Mirrors one or more selected elements about a line that you define.
Scale
Reduces or enlarges selected elements by a scale factor that you define.
Bring to Front
Moves a selected element to the front of the display order.
Send to Back
Moves a selected element to the back of the display order.
Pull Up
Moves a selected element up one position in the display order.
Push Down
Moves a selected element down one position in the display order.
Connect
Makes a point fixed on another element.
Horizontal / Vertical
Makes a line or two points horizontal or vertical.
Parallel
Makes two lines parallel.
Perpendicular
Makes a line or arc perpendicular to another element.
Tangent
Makes two elements tangent.
Colinear
Makes two lines colinear.
Concentric
Makes two arcs or circles concentric.
Symmetric
Makes two elements symmetric.
Equal
Makes two elements or dimensions equal.
Lock
Locks an element so that it cannot be moved.
Relationship Handless
Toggles the display of relationships within the active window.
Alignment Indicator
Turns on the horizontal and vertical relationship indicator.
Format Painter
Copies formatting, such as line weight, color and line style, from a selected graphical element and applies it to other graphical elements as they are selected. The two graphical elements have to belong to the same type. The command is available in all composite drawings and conventional cable block diagrams.