Show Auxiliary Contacts Next to Disconnect Equipment in SLDs - Intergraph Smart Electrical - Help - Hexagon

In single line diagrams, you can show auxiliary contacts next to their associated disconnect equipment.

This procedure applies only to those auxiliary contacts that are represented by independent auxiliary contact symbols. If the auxiliary contact symbol is represented by a compound symbol, see Use Compound Symbols for Disconnect Equipment with Auxiliary Contacts in SLDs.

1. Generate a new single line diagram. See Generating New Single Line Diagrams.

   OR

   Open an existing single line diagram. See Opening Existing Single Line Diagrams

2. Select Tools > Drawing Options.

3. On the Single Line Drawing Options dialog, select the Related Equipment tab.

4. Under Auxiliary contact options, select the Show auxiliary contacts next to disconnect equipment check box.

5. Under Auxiliary contact symbol displacement, type the values for the X: and Y: coordinates, and select the units required from the Units list.

6. Select Generate.

If you do not select the Show auxiliary contacts next to disconnect equipment check box, the auxiliary contacts will be shown under their feeding equipment or they will not be shown at all if their feeding equipment is not part of the current SLD.