Generate a Schematic for an Instrument - Intergraph Smart Electrical - Help - Hexagon

The software allows you to generate a schematic for a selected instrument.

1. In the Electrical Index, expand the following the Electrical Equipment > Instruments hierarchy.

2. Select an instrument for which you want to generate a schematic.

3. Select Actions > Generate Schematic .

4. On the Generate Schematic dialog, under Typical schematic, select an appropriate typical schematic that you created in the Reference Data Explorer.

5. Under Drawing name, type a name for the new schematic.

6. Examine the block data in the data window. Make sure that the typical blocks are defined correctly and their displacement from the page origin is set correctly.

7. Select the Macros tab. Examine the macros in the data window. Make sure that each macro is associated with a correct item. To associate a macro with another item, select a macro in the data window and then under Macro details, select another item from the Macro item name list.

8. Select the Unresolved Items tab to check whether there are item tags for which there are no corresponding items in the associated typical schematic.

9. Select OK to generate the schematic.

The items that can be included in a schematic for an instrument are:

• The feeder and all the upstream items, up and including the bus.

• All the associated equipment, cables, and the existing signal.