Batch Associate Cable Sides with Glands - Intergraph Smart Electrical - Help - Hexagon

Intergraph Smart Electrical Help

Language
English
Product
Intergraph Smart Electrical
Search by Category
Help
Smart Electrical Version
10
  1. In the Electrical Index, expand the folder hierarchy Wiring Equipment > Cables.

  2. Select the required cable folder: Power Cables, Control Cables, Grounding Cables, or Instrumentation Cables.

  3. In the lower pane, select the required cables for which you want to associate glands. You can also perform the cable selection in the EDE.

  4. Select Actions > Cables > Batch Cable Side and Gland Associations.

    To dissociate an existing gland association only without replacing the gland, select the Dissociate gland check box on the required cable side and continue from step 8. To replace a cable gland on one or both cable sides, continue from the next step.

  5. On the From or To cable side, below the Gland field, select Find to open the Find dialog.

  6. Select Find Now.

  7. In the Results data window, select the gland that you want to associate with the cable sides, and select OK.

  8. From the cable list in the Batch Cable Side and Gland Associations dialog, select the check boxes beside the cables for which you want to make gland associations.

    SHARED Tip You can select the Speed up association check box to make the process work faster. However, if the software encounters a problem with one of the cables, the entire association process is canceled.

  9. Select OK.