Defining Test Equipment - Intergraph Smart Instrumentation - Help

Intergraph Smart Instrumentation Help

Language
English
Product
Intergraph Smart Instrumentation
Search by Category
Help
Smart Instrumentation Version
13.1

Smart Instrumentation allows you to define and assign test equipment to the instruments in your plant. Test equipment is used to check that the calibration of your plant's instruments is accurate and operating within their given parameters, and to recalibrate those instruments that do not meet their required parameters. You can assign one item of test equipment to many instruments. Each piece of test equipment has assigned to it one or more user defined profiles. A profile is a template of the default settings/values used by the test equipment. For example, checking the minimum/maximum limits of various temperature gauges, you can assign a different profile to your test equipment, that represents the calibration requirements, for each temperature gauge. Test equipment tags are maintained on the domain level in the Test Equipment folder.

  • If you are using the Fluke Documenting Process Calibrator models 743B or 744, there is a separate interface and special forms that you use for exchanging and displaying the calibration data. For details, see Working with the Fluke Interface.

  • Test equipment cannot include the following data:

    • I/O types

    • P&IDs

    • Process equipment

    • Process lines

    • Process data

    • Electrical power requirements (Smart Electrical integration)

    • Associated symbols for the Enhanced Report Utility

    • Calculation module data

    • Wiring data

    • Loop data or association

See Also

Select Test Equipment