Filter the Display of Data in the I/O Assignment Window - Intergraph Smart Instrumentation - Help

Intergraph Smart Instrumentation Help

Language
English
Product
Intergraph Smart Instrumentation
Search by Category
Help
Smart Instrumentation Version
13.1

This feature enables you to filter the data displayed in the I/O Assignment window. You can instruct the software to display only assigned or unassigned instruments. Furthermore, you can display only uncoupled instruments, uncoupled CS tags, or both. Also, you can select a predefined Browser filter for panels.

  1. In the I/O Assignment window, Select Actions > Filter Explorer Filter icon 16bit to open the I/O Assignment Filter dialog.

  2. Do one of the following:

    • From the EDE filter list, select a predefined filter for panels. Note that if you select a predefined filter from this list, it overrides all the other settings in this dialog.

    • Define your filter using the options in the Filter for and Definition group boxes.

  3. Under Filter for, select the filter option to determine which instrument tags and control system tags will be displayed in the I/O Assignment window. Select one of the following:

    • Unassigned tags coupled with control system tags — display the instruments that have not yet been assigned to channels but have already been coupled with control system tags. Then, you can determine whether to display uncoupled CS tags, uncoupled instruments, or both.

    • Assigned tags coupled with control system tags — display only the assigned instruments that have already been coupled with control system tags. Selecting this option disables the other three options.

  4. To further filter the display of unassigned instruments, uncoupled instruments, or both, under Definition, define an appropriate filter expression. For details, see Define a View Filter.

  5. To use the current filter settings in subsequent sessions of the I/O Assignment window, select the Apply filter settings in all sessions check box.

  6. To display only the instruments that were retrieved from Smart Electrical, select the Display electrical instruments only check box.

  7. To limit the display of data to the current lowest plant hierarchy level, select the Display current unit data only check box.

  8. Select OK.