Copy Routing Data to Another Cable - Intergraph Smart Instrumentation - Help

Intergraph Smart Instrumentation Help

Language
English
Product
Intergraph Smart Instrumentation
Search by Category
Help
Smart Instrumentation Version
13.1

After you create a cable routing, you can copy the routing data to other cables, thus saving redefinition time for similar cables. Note that if you copy routing data to a cable with existing routing, the new routing overwrites the existing routing data.

  1. In the Domain Explorer, select the cables from which you want to copy routing data.

  2. Right-click the highlighted cables, and then on the shortcut menu, select Actions > Copy Cable Routing.

  3. On the Copy Cable Routing dialog, select a cable from the Wiring Explorer list.

    SHARED Tip A source cable is a trunk cable for which you have already defined cable routing options, created the routing sections, and associated cables with these sections. Smart Instrumentation displays the routing data for the source cable you select in the Source routing data grid.

  4. From the Wiring Explorer, highlight target cables, and select OK, to copy them to the Destination cables group box.

  5. Select the cables to which you want to copy the routing data of the source cable in one of the following ways:

    • Select the check box to the left of each cable.

    • Choose Select all cables without routing. Use this option to avoid overwriting existing routing data.

    • Choose Select all to enable overwriting of existing routing data on the destination cables.

  6. Select Copy.

To copy routing data to additional cables, repeat steps 3 through 6.