Add Intercom Equipment - Intergraph Smart Instrumentation - Help

This procedure explains how to add intercom to an intercom cabinet.

1. In the Reference Explorer or Domain Explorer, expand the Telecom Panels folder.

2. Expand the Equipment Cabinets folder to display the existing intercom cabinets.

3. Right-click an intercom cabinet and then select New > Intercom Equipment.

4. On the New Wiring Equipment dialog, type a name for the new intercom equipment and then select OK.

5. On the General tab of the Wiring Equipment Properties – Intercom dialog, type the name of the new intercom.

6. Select the Double width check box if the hub occupies a double width slot or position.

7. In the Details group box do the following as you require:

   1. Type a description.

   2. Select an intercom type, model, and manufacturer. If the required value is not available on the list, select to define a new one.

   3. Enter a sequence if you need to define the intercom sequence in the cabinet.

8. Select the Category Properties tab.

9. Revise and modify category property values as you require. Select the value for each property and modify it as needed.

   Wiring equipment categories that are shipped with Smart Instrumentation have predefined properties. You cannot delete or rename any of these categories or their properties. You can only edit their values. However, you can add user-defined properties to any category which you can rename or delete as you want. For details, see Customize and Use Wiring Equipment Categories.

10. Select OK to accept your settings and close the dialog.