Before associating calibration profiles, you must create them in the Calibration module. For details, see Create a Calibration Profile.
-
In the Instrument Index module, open the Instrument Type Profile dialog for the target instrument type. For details, see Define an Instrument Type Profile.
-
Select the Calibration tab.
-
Select Associate.
-
On the Associate Calibration Profile dialog, select a calibration type.
-
Select a calibration profile.
-
Select OK.
It is only possible to select and associate one profile at a time.
-
Repeat steps 3 to 6 for other profiles you want to associate with the current instrument type.
-
If you want to set one profile as default, on the Calibration tab, in the Default column, select a check box beside the target profile.
If you set a profile as default, when opening calibration settings for a new instrument,
you bypass the Select Calibration Profile dialog and automatically open the Tag Calibration Settings window. In the Tag Calibration Settings window, the software loads the Calibration Settings form assigned to the default profile, including data values you defined in the Calibration Profile Settings window. You do not have to set a profile as default. If more than one profile is
available for the instrument type, and none of them are marked as default, the Select Calibration Profile dialog opens, where you select the profile you need, and then open the calibration
settings.
-
On the Instrument Type Profile dialog, select Apply or OK.