Remove an Instrument from a Composite Spec - Intergraph Smart Instrumentation - Help

Intergraph Smart Instrumentation Help

Language
English
Product
Intergraph Smart Instrumentation
Search by Category
Help
Smart Instrumentation Version
13.1
  1. In a composite specification, select Actions > Remove Tags from Composite Spec PPM All Outputs Graphic

  2. In the dialog that opens, select one or more tags and select OK.

  3. On the toolbar, select PPM All Outputs Graphic to refresh the spec.

    • When removing tags from a loop composite spec, you can remove all the instruments.

    • When removing tags from an instrument composite spec, you cannot remove the last remaining tag because such a spec must include at least one instrument tag.

    • After removing instruments, the sections remain displayed in the spec. If you want to remove these sections from the spec, you must remove them in the Page Editor. For details, see Remove a Section from a Composite Page.

  4. Select Save Icon 16bit to save the changes.