On this page you define the number of connectors to be created in the group.
Create coupled connectors
Select this check box to create coupled connectors (the internal links are made automatically). Clear this check box if you want to create the connector couplings manually.
Coupled Layout
Only available when you select the Create coupled connectors' check box.
Number of connectors
Enter the number of connectors you require for one side of the group. The software creates the connectors, and their internal links, on both sides of the group. You can manually change the internal links later if required.
Non-coupled layout
(Only available when you clear the Create coupled connectors' check box.)
Number of connectors on the left side
Enter the number of connectors you require on the left side of the group.
Number of connectors on the right side
Enter the number of connectors you require on the right side of the group.
Connector numbering
Prefix
Type a prefix for the connector numbering, if required.
-
After completing a plug-and-socket group, editing the number of connectors only allows you to increase the number of connectors. You cannot delete existing connectors from the plug-and-socket group.
-
After creating a plug-and-socket group it is not possible to change the total number of connectors from an even number to an odd number of connectors.