Assign Cables to Drums Manually (Without Optimization) - Intergraph Smart Instrumentation - Help

Intergraph Smart Instrumentation Help

Language
English
Product
Intergraph Smart Instrumentation
Search by Category
Help
Smart Instrumentation Version
13.1

This procedure explains how to assign a cable to a cable drum manually. This action requires that you predefine the following for this cable:

  • A cable type.

  • At least one pulling area.

  • A cable drum associated with the cable type and with the pulling area.

The manual cable drum assignment is performed without optimization, which means that the designated cable drum is not necessarily the optimum for the selected cable.

  1. In the domain Explorer, right-click a cable and then select Properties.

  2. On the Cable Properties dialog, from the Pulling area list, select the pulling area that the designated cable drum is associated with.

  3. Make sure that the cable type is selected from the Type list.

  4. From the Cable Drum list, select the cable drum to which you want to assign the selected cable. Select to add any required items that are not on the list.

  5. Select OK to save your changes and close the Cable Properties dialog.