Connect Jumpers Dialog - Intergraph Smart Instrumentation - Help

Intergraph Smart Instrumentation Help

Language
English
Product
Intergraph Smart Instrumentation
Search by Category
Help
Smart Instrumentation Version
13.1

This dialog enables you to create and connect multiple jumpers in a repetitive way. You can define constant gaps between the jumpered terminals if required. Also, you can jumper the last remaining terminal in the selected terminal pattern if required.

Terminal one – first jumper

Allows you to select the first terminal that will be connected to the first jumper.

Left – Right

Allows you to select an orientation for the first terminal.

Terminal two – first jumper

Allows you to select the second terminal that will be connected to the first jumper.

Left – Right

Allows you to select an orientation for the second terminal.

Interval between jumpers

Allows you to set a constant gap between the jumpered terminals.

Last terminal

Allows you to select the last terminal in the pattern to be jumpered.

Number of jumpers

Displays the calculated number of jumpers that will be connected according to the selections you made on this dialog.

Jumper last terminal

Instructs the software to jumper the last remaining terminal that was not included in the definitions you made on this dialog.

Jumper name

Allows you to type a jumper name.

First terminal

Allows you to select a terminal for end one jumper connection.

Jumper color

Allows you to select a jumper color.