-
In the Reference Explorer, expand the hierarchy: Panels > Marshaling Racks > TYPICAL MARSHALING.
-
Right-click terminal strip JB SIDE-1 and then on the shortcut menu, click Duplicate.
-
On the Terminal Strip Properties dialog box, change the terminal strip name to DCS SIDE-AO.
-
Click OK.
Terminal strip DCS SIDE-AO now appears in the Reference Explorer under marshaling rack TYPICAL MARSHALING.
-
Expand DCS SIDE-AO as we want to have a 4-channel AO terminal strip.
You will now delete the surplus terminals in terminal strip DCS SIDE-AO: -
In the Reference Explorer, select terminal 5+ and while holding down SHIFT, select Terminal 16SH; this action selects all the terminals between 5+ and 16SH.
-
On your keyboard, press DELETE.
-
When prompted, click Yes to confirm the deletion.
Only 12 terminals (from 1+ to 4SH) now remain in terminal strip DCS SIDE-AO:
-
The same result can be achieved by creating a new terminal strip configuration using the New > Terminal Strip command on the shortcut menu.
You have now completed the creation of marshaling rack TYPICAL MARSHALING with its internal terminal strip.