Create a New Instrument Tag without an Associated Profile - Intergraph Smart Instrumentation - Training - Intergraph Process, Power & Marine Documentation

Intergraph Smart Instrumentation Tutorial

Language
English
Product
Intergraph Smart Instrumentation
Search by Category
Training
Smart Instrumentation Version
2018 (12.0)
  1. Click Wiring icon 16bit on the main toolbar to open the Wiring module.

  2. On the module toolbar, click Panel icon 16bit to open the Device Panels window.

  3. On the module toolbar, click New Tag .

  4. On the New Tag Number dialog box, under Tag class, select Conventional.

  5. Under Tag number, type 101-FT-555 as the new tag name and click OK.

    SHARED Tip If the Select Instrument Type dialog box opens, select FT FLOW TRANSMITTER and click OK.

  6. On the Loop Name dialog box, accept 101-F-555 and click OK.

  7. On the Loop Number Properties (New) dialog box, accept all the definitions and click OK.

  8. On the Create Device Panel and Cable dialog box, from the Reference device panel list, select REF FIELD DEVICE 2-WIRE.

  9. In the Conventional connections group box, click New.

  10. On the Conventional Connection Properties dialog box, enter data as shown below, and then click OK.

    The Create Device Panel and Cable dialog box should now appear as shown:

  11. Click OK to close the Create Device Panel and Cable dialog box.

  12. On the Tag Number Properties dialog box, accept the given values and click OK.

  13. Click X to close the Device Panels window.

  14. In the Domain Explorer, click , and find the new device panel and cable you just created (in their respective folders).