-
On the Specifications Module window toolbar, click (Open Spec).
-
Do the following to create a new pressure gauge tag:
-
On the Open Specification dialog box, in the Item number box, type 101-PI -102.
-
When prompted to create a new tag number, click Yes.
-
On the Select Instrument Type dialog box, select PI PRESSURE GAUGE, and then, click OK.
-
On the Loop Name dialog box, click Cancel.
-
On the Tag Number Properties dialog box, click OK to return to the Open Specification dialog box.
-
On the Select Fluid State dialog box, click OK to the Liquid selection.
-
-
On the Open Specification dialog box, in the Form number box, type 8.
-
Click OK.
-
In the New Specification dialog box that opens, select Add tag to existing multi-tag spec.
The New Specification dialog box should now display the existing document number and the tags that you added in the spec in the previous procedures:
-
Click OK.
If the Select Fluid State pop-up window displays, select Liquid and click OK
-
Add some values in the Multi-Tag List page, and then save and close the specification.