You will now customize a new page called Modified Flow Element, change and move some headers and their associated data fields. You will switch the location of two fields: Line Size and Line Schedule.
-
On the module toolbar, click to open the Page Editor.
-
On the Page Editor module toolbar, click (Open Page).
-
On the Select Specification Page dialog box, in the Find page box, type Orifice.
-
In the Specification Page column, select the Orifice Plate page and click OK.
-
On the module toolbar, click (Edit) to open the Edit Fields and Headers toolbar on the right.
-
On the specification page, double-click the Line Size header to open the Edit Text dialog box.
-
In the Text string box, type Line Schedule over the displayed field header.
The dialog box should appear as shown:
-
Click OK.
-
Repeat steps 6 through 8 to swap the text of the Line Size and Line Schedule headers.
-
Swap the positions of the data fields belonging to Line Size and Line Schedule as follows:
-
On the Edit Fields and Headers toolbar, click (View Names).
-
Click the line_size field.
-
On the Edit Fields and Headers toolbar, click (Position) to display the pop-up window showing the position of the line_size data field.
-
Make a note of the field position values.
-
Select the line_sched data field and click (Position) to display the field position values.
-
Make a note of the X,Y values.
-
Select the line_sched data field and drag away from its original position so that the original position becomes vacant.
-
Drag the line_uom data field to the right of the line_size data field.
-
Select the line_size field again and display the Field or Header Position pop-up window.
-
In the pop-up window, in the X box type 2423.
-
Select the line_sched field.
-
In the pop-up window, type the former line_size value for X (1627). Verify that the value of Y is 188.
-
Select the line_uom field.
-
In the pop-up window, type 2810 as the value for line_uom X. Verify that the value of Y is 188.
-
-
When done, click (Position) again to close the Field or Header Position pop-up window.
The modified field positions should appear as shown:
All the above steps of moving fields around can be accomplished when the mouse hovers over a field, to display a + , which enables dragging.
-
On the Page Editor toolbar, click (Edit) to exit the edit mode and close the Edit Fields and Headers side toolbar.
-
On the Page Editor toolbar, click (Save as Page) on the module toolbar to save the modified page as a new page.
-
On the Save as Page dialog box, click New to open the Page Definition Properties window, and then type the new page name as shown.
-
Click OK to create the new page.
-
Click OK to close the Save as Page dialog box.
-
Close the Page Editor.