Populate from PLL - Intergraph Smart Materials - Version 10.2 - Help - Hexagon

Intergraph Smart Materials Classic Help

Language
English
Product
Intergraph Smart Materials
Subproduct
Classic
Search by Category
Help
Smart Materials/Smart Reference Data Version
10.2

If you select this command, window 17 will open where you can select multiple PLL units to be populated to the BOM. The displayed PLL units have been created on the L.20.01 Process Line Lists screen.

Tick the Select check box for all nodes to be created in the WBS, or click the Select All button to mark all displayed units. To cancel a selection, use the Deselect All button. Finally, click the Use in BOM button. All selected PLL Units will be created as child nodes underneath the selected BOM node. These child nodes will get the same name as the corresponding PLL units and the node type assigned to the ZB_LS_UNIT project default. Any existing process lines of the selected PLL units will be created as child nodes of the unit BOM nodes. These child nodes will get the same name as the corresponding process lines and the node type assigned to the ZB_LS_LINE project default.

It is mandatory that the ZB_LS_LINE and ZB_LS_UNIT project defaults are correctly defined. It is mandatory that the node type hierarchy is defined on B.10.07 Node Type Hierarchy with the node type assigned to the ZB_LS_UNIT project default set as the Parent Node Type of the node type assigned to the ZB_LS_LINE project default. For an example, see the picture below, where node type UNIT is assigned to ZB_LS_UNIT and node type LINE to ZB_LS_LINE.