You can issue materials for an ident using create MIR by BOM Ident.
-
On the Home page, click Site > Warehouse Management > Material Issuing.
-
Click Create MIR.
-
Select BOM Ident from the Create MIR of Type list, and click Create.
-
Select the issued date of the MIR report from the Issued On calendar.
-
Type the name of the person who has issued the report in the Issue By box.
-
Type the descriptions of the MIR in the Short Description and Description boxes.
-
Select a Company code from the list.
-
Select the overissue warehouse assigned to this subcontractor from the Overissue Warehouse list.
This is required, if you insert higher issue quantities than the related list Pos quantity.
-
Select the Location and Scrap Warehouse for the issued material.
-
Select a commodity group from the Commodity Group list and commodity part from the Commodity Part list.
-
Select Commodity Code, Ident Code, and Tag Number respectively.
-
Select Approval Template to select a template for the MIR.
-
Select Ready for Approval, if the issue report is ready for approval.
-
Select Zero Quantity to display list nodes with issue quantity which are zero.
-
Select Only Site Status to include the materials which are of the best quantity and Save.
-
To add BOM nodes for material issue, click BOM Nodes for Material Issue.
-
Click Populate to show the BOM Node List. Select List Node(s) and click Fill In.
If the Revision is more than 0, only then Add Row button gets activated.
-
To post the MIR, click on MIR By BOM Ident tab and click Post. To unpost the MIR click Unpost.
-
Click Approval Sequence in MIR By BOM Ident tab to approve or reject an MIR.
When the project default ZC_HEATQTY is set to 'Y', the following happens:
-
The total of the quantity of issued heat numbers should be equal to the total quantity of assigned heat numbers.
-
You can only select from the available list of heat numbers in the inventory and cannot add a new heat number.