Print Dialog - Intergraph Smart P&ID - 11 - Help - Hexagon

Intergraph Smart P&ID Drawing Manager

Language
English
Product
Intergraph Smart P&ID
Subproduct
Drawing Manager
Search by Category
Help
Smart P&ID Version
11

Controls how a drawing is printed. This dialog opens when you select to print when viewing or comparing a drawing version.

PPM All Outputs Graphic

Name

Specifies the printer that you want to use. You can select from a list of all the available configured printers. The information below the Name box applies to the selected printer. The printer that you select in the Name box is the default printer for the rest of the current design session until you specify a different printer.

Properties

Opens the Printer Document Properties dialog, which allows you to specify page setup and other printer settings specific to the selected printer.

Status

Describes the state of the selected printer, for example, busy or idle. This area is read-only.

Type

Displays the type of printer currently selected. This area is read-only.

Where

Identifies the printer path, printer port, queue name, or physical location of the currently selected printer. This area is read-only.

Print range

Allows you to select the following options:

Drawing

Prints the entire drawing based on the defined page size.

View

Prints the portion of the drawing that is actually visible in the Print Preview window.

Number of copies

Allows you to specify the number of copies of the drawing to be printed.

Collate

When the number of copies is more than 1, selecting this check box collates the output by printing all the pages consecutively for each copy. Clearing the check box causes the same page of each copy to be printed together for the number of copies specified.

Settings

Opens the Settings dialog, which allows you to view and edit the scale and origin of your print area.