Apply Display Set Dialog - Intergraph Smart P&ID - 10 - Help - Intergraph

Intergraph Smart P&ID Help

Language
English
Product
Intergraph Smart P&ID
Search by Category
Help
Smart P&ID Version
10
Smart Engineering Manager Version
11
SmartSketch Version
10.0(2018)

Specifies which symbols display in the Drawing View. Select View > Apply Display Set to open this dialog. Display sets use filters that control which symbols you want to display. You can save these filters and share them with other users working in the same Plant. If a display set is currently active, its name displays in the lower right-hand corner of the product.

Display sets can be created manually or automatically. For the manually created display sets, you can define filters, colors and widths for the display items. For automatic display sets, filters are created automatically with colors and widths already defined, that you can modify as required.

The automatically created display sets are shown in the AutoDisplaySet folder that appears under the plantā€™s folder. See Working with Auto Display Sets.

To remove the results displayed by selecting the Apply Display Set command, select View > Clear Display Set.

Apply Display Set Dialog

PPM All Outputs Graphic Add Folder

Adds an empty folder to the Tree. You can use Rename to define a name for the folder. These folders can be used to organize display sets.

PPM All Outputs Graphic Add Display Set

Creates a new display set. You can use Rename to define a name for the new display set.

Auto Display Set Icon Create Auto Display Set

Automatically creates a display set for a plant or a drawing along with filters. Filters are automatically created for the Plant Item properties you select. See Working with Auto Display Sets.

PPM All Outputs Graphic Add Filter

Displays the Select Filter dialog. Select any displayed filter to add it to the current display set.

 PPM All Outputs Graphic  Save

Saves the selected display set.

 PPM All Outputs GraphicCut

Removes the selected display set and places it in memory.

PPM All Outputs Graphic Copy

Copies the selected display set into memory.

 PPM All Outputs Graphic Paste

Pastes any values that are currently stored in memory.

 PPM All Outputs Graphic Delete

Deletes the selected item.

PPM All Outputs Graphic Rename

Allows you to select on an item in the Tree and rename it.

PPM All Outputs Graphic Move Up

Allows you to move the selected filter name up in the list.

PPM All Outputs Graphic Move Down

Allows you to move the selected filter name down in the list.

PPM All Outputs Graphic Properties

Displays the properties of the filter.

Filter Name

Lists filter names for the selected display set. For display sets you create, you can define filters using Add Filter command. For auto display sets, filters are automatically created with a defined naming format.

Color

For manually created filters, this column shows the selected display color of the items in the selected filter. For automatic filters, it shows the color auto assigned to the filters. You can click in the Color field to display a color palette and then select any color to define a new color for any selected item(s). The default color square is defined with the crosshatch PPM All Outputs Graphic pattern. Default is the color value specified in Options Manager for the item type's symbology.

Width

For manually created filters, this column shows the selected display width of items defined in the selected filter. For automatic filters, it displays the default width defined for the filters. A wider display width would cause the item to be more visible. Default is the width value specified in Options Manager for the item type's symbology.Legend Box

Selecting this checkbox displays a legend of the filters of a display set applied on the drawing(s) and prints the legend when you print the drawing(s).

For the legend to appear, select Legend Box and select OK.

For more information, refer to Display Set Legend.

Apply

Applies the active display set on the drawing.

  • The display sets and filters created automatically function in the same way as the display sets and filters created manually.

  • For a display set that contains one or more asking filters, on selecting Apply, the Asking Filters dialog opens with the default values for each asking filter, allowing you to change the operators and values of each asking filter's attributes, if desired. The attribute values you selected are used when saving or printing the drawing and those values are retained until the display set is cleared for that drawing. This applies on a per drawing basis; therefore if the same display set is applied to more than one drawing, you can enter different attribute values for each asking filter and those values are retained independently for each drawing.