Break a Pipe Run - Intergraph Smart P&ID - 10 - Help - Intergraph

Intergraph Smart P&ID Help

Language
English
Product
Intergraph Smart P&ID
Search by Category
Help
Smart P&ID Version
10
Smart Engineering Manager Version
11
SmartSketch Version
10.0(2018)
  1. In the drawing, right-click the pipe run that you want to break.

  2. On the shortcut menu, select Break Run.

  3. In the drawing, click the point where you want to break the run.

    The software breaks the selected pipe run into two separate runs at the selected point.

  • If a pipe run includes an inline component, you can break the run on either or both sides of the component. If you break the run close to the component on all sides, the software creates a pipe run with a zero length connector at the connect point of the component. You can view this pipe run in the Engineering Data Editor. This option is not currently available for diagonally drawn pipe runs.

  • You can change values for the properties of the new run by selecting it and then entering the values in the appropriate rows in the Properties window.

  • If the Properties window is not displayed, then you can display it by selecting the line and then selecting Edit > Properties.

  • Smart P&ID allows pipe runs to be associated with a different plant group other than the one the drawing resides in. If you break the pipe run by inserting a break component such as a reducer, both pipe runs will retain the original value of the Plant Group ID property (it is not changed to the plant group the drawing resides in).