Draw a Rectangle or Square - Intergraph Smart P&ID - 11 - Help - Intergraph

Intergraph Smart P&ID Help

Language
English
Product
Intergraph Smart P&ID
Search by Category
Help
Smart P&ID Version
11
Smart Engineering Manager Version
12
SmartSketch Version
11
  1. On the Draw toolbar, select the Rectangle Command to open the Rectangle Ribbon.

  2. Select the location for one corner of the rectangle or square.

  3. Select to define the rotation angle and the width of the rectangle or square.

  4. Do one of the following:

    • To draw a rectangle, select to define the height.

    • To draw a square, hold the SHIFT key, and then select. The command automatically makes the height equal to the width.

    Rectangle or square

  • Instead of selecting to draw the rectangle or square, you can type values in the Width, Height, and Angle boxes on the ribbon. You can also use a combination of graphic and ribbon bar input.

  • Instead of selecting several different points to draw a rectangle, you can draw a diagonal line and the software automatically changes it to a rectangle.

  • If you place dimensions on a rectangle, they are always driven dimensions.

  • You cannot ungroup a rectangle into individual lines.