Batch Replace Properties that Include Units of Measure Using Plant Editing - Intergraph Smart P&ID - Help - Intergraph

Intergraph Smart P&ID Help

Language
English
Product
Intergraph Smart P&ID
Search by Category
Help
Smart P&ID Version
9 (2019)
Smart Engineering Manager Version
10 (2019)
SmartSketch Version
10.0(2018)

This option applies where the cell contents have identical values and units of measure.

  1. On the Engineering Data Editor toolbar, choose an item type from the select list, for example, Pipe Run.

  2. Select the scope for the display of the data (Active Drawing, Other Drawings, stockpiles).

  3. If needed, apply a filter to display only the data rows with identical values and units of measure.

  4. Select a field with the preferred value, and select an alternative format from the list. This changes to the equivalent value in the new units of measure. For example, 50 psi becomes 2.4 bar g. You can also change to a different format for the same units of measure; for example, where 50 psi becomes 50.254 psi.

  5. Right-click in the field from which you want to copy data and select Copy on the shortcut menu.

  6. Select the field to which you want to copy data, or hold down SHIFT while selecting several consecutive fields in a column.

  7. Right-click, and select Paste on the shortcut menu.

  • The software copies the equivalent value in the new units of measure to all the selected fields.

  • If you use Plant Editing to change a unit of measure value in a non-active drawing, propagation occurs according to the System Editing rules defined for the plant and the Engineering Data Editor display is automatically updated. This includes propagation of data between non-active drawings across Off-Page Connectors (OPCs) when both drawings involved are not opened by a user. Propagation does not occur across OPCs between the active drawing and a non-active drawing.