Draw Ellipse - Intergraph Smart Production - 20 - Help - Hexagon

Intergraph Smart Production Cutting

Language
English
Product
Intergraph Smart Production
Search by Category
Help

Click Ellipse

on the toolbar to display the Draw Ellipse properties in the State Manager.

Type

Specifies the parameters you need to enter in the work area to draw the ellipse or elliptical arc. The available types are listed below.

Center Point

Specifies the center point coordinates, two radius values, and an angle. These properties need to be defined so that the software can draw the ellipse.

Axis

Specifies the axis start point coordinates, two radius values, and an angle. These properties need to be defined so that the software can draw the ellipse.

Elliptical Arc

Specifies the axis start point coordinates, two radius values, the angle, the start angle, and the sweep angle. These properties need to be defined so that the software can draw the ellipse.

Parameters

Center point X, Y

Specifies the center point coordinates.

First radius

Specifies the first radius.

Second radius

Specifies the second radius.

Angle

Specifies the angle of the ellipse.

Start angle and End angle

Defines the length of sweep angle. The length of sweep angle defines the length of elliptical arc.