-
Click Arc on the toolbar to display the Draw Arc properties.
-
Click the Draw type, and then follow the corresponding procedure below. The available types are Three Points , Center Point , and Tangent .
-
Click Confirm .
By three points:
-
Click the work area to define the start point. Alternatively, type the start point coordinates in the Start point X and Y boxes.
-
Click the work area to define the end point. Alternatively, type the end point coordinates in the End point X and Y boxes.
-
Specify the Arc radius .
By the center point:
-
Click the work area to define the center point. Alternatively, type coordinates in the Center point X and Y boxes.
-
Click the work area to define the radius. Alternatively, type a value in the Arc radius box.
-
Click to define the start angle. Alternatively, type a value in the Arc start angle box.
-
Move the cursor in a clockwise direction to specify a positive sweep angle. Move counterclockwise to specify a negative sweep angle. Alternatively, type a positive or negative value in the Arc sweep angle box.
By tangent:
-
Define the Arc start tangent.
-
Define the Arc radius .
-
Define the Arc sweep angle .
To edit an arc:
-
Select the arc to edit, and use any method below.
-
Change the properties in the State Manager.
-
Drag the center point to move the arc.
-
Drag the start or end point to resize the arc.
-
Drag the radius point to resize the arc.
-